Buy 00460431 Type 360 from Erichsen in Sweden (Sverige)

6 with cutting, cutting distance

6 cutting, cutting distance polyamide bristle brush and a plastic case

Cutting element

Diving flow cup in accordance with DIN ISO 2431 with nozzle diameter 6 mm

Scratch hardness

Mar Tester

Cutting element

with 6 blades and cutting distance 1 mm for cross-cut tests according to EN ISO, ISO, VDA, EN, with magnifier, Polyamide bristle brush and plastic case

6 with cutting, cutting distance

ISO 2808, BS 3900: C5 4 Part measuring ranges: 5-100 microns (5 microns scale division) 100-300 microns (10 microns scale division) 300-700 microns (20 microns scale division) 700 - 1500 microns (40 microns graduation

Diamond probe according to DIN EN 438-2 and ISO 4586-2 (Cone angle 90 °, tip radius 90 microns)

with manual operation, maximum drawing force 30 kN and compliance with the standard constant adjustable blank holder pressure max. 10 kN, with Tiefungsanzeige by counter with 0.1 mm Reading accuracy as well as a testing tool no. 27 by EN ISO 20482; for checking the drawability of sheet metal and bands from 0.1 to 1.5 mm thick (about 400 N / mm² tensile strength) in widths from 13 to 90 mm, by the Erichsen cupping test according to EN ISO, EURONORM, BS, NF, GOST, UNI, UNE. Weight: approx 36 kg net Dimensions: 340 x 350 x 450 mm (L x W x H)

with electro-hydraulic drive, max. Pulling force of 60 kN and automatic test sequence with a stop at specimen failure (from 0.3 mm sheet thickness), for testing of sheet and strip any kind of pressure -, punching and deep drawing ability by means of the I. Erichsen cupping test according to EN ISO, EURO NORM, BS, NF, GOST, UNI, UNE, II. Bore Expanding sample (KWI) to Siebel and Pomp. The testing machine is equipped with automatic shut-off device and delay automatic execution in accordance with Technical Description 102 / D, a Cupping Tool No.. According to 27 EN ISO 20482 as well as a filling hydraulic oil equipped. Power supply: 400 V three-phase, 50 Hz, 1 kW (other voltages on request) Weight: about 280 kg net Dimensions: 650 x 680 x 1125 mm (L x W x H)

Film Applicator System Wasagasse 288 "REFERENCE CLASS" with film width 180 mm, gap heights + 150 microns 200 microns (please specify when ordering)

Film Applicator System Wasagasse 288 "REFERENCE CLASS" with film width 230 mm, gap heights + 150 microns 200 microns (please specify when ordering)

Sikkens scratching tool

Washability and scrubbing tester

Probe for the model 295/XIV

Sikkens cutting egde

Immersion flow cup with nozzle Ø 4 mm

Paint Inspection Gauge

resistivity meter

Brightness meter

Glossmeter

Gloss Meter

(Paint shaker (1400-0H-E5), for use as a dispersing machine for laboratory-color approaches for the determination of dispersion of pigments in accordance with DIN EN ISO 8780-2, to carry out mixing and Homogenisiervorgängen of all kinds, including holding brackets with flange. 2-arm device with lateral supports for receiving containers up to every 7 kg (about 5 liters) Total weight per working side, with the standard motor 5-1816 (1/4 hp) and a built-in mechanical timer (0 - 60 minutes), incl. cross foot and guard (complete chamber), designed according to the applicable EC directives. Power supply: 230 V, 50 Hz)

Base unit with electric motor (5 U / min) Rotary driven dish (Ø 115 mm) for clamping the test panels max. Dimensions 100 mm x 100 mm x 22 mm or Ø 140 mm x 22 mm. The package includes load arm for receiving the Test tool with a device for radial fine adjustment (Micrometer), 2 weights for the areas 1 N and 10 N, tare with dragonfly, circular level, hand magnifier, screwdrivers and carrying case. Power supply: 230 VAC / 50 Hz (other voltages on request)

Scratch Hardness Tester