| BRAND | ProMinent |
| Product | GMXA0708TTT00000UA1030BDE |
| Description | magnetic dosing pump |
| Internal code | IMP4960599 |
| Custom code | 84135040 |
| Technical specification | GMXA magnetic dosing pump GAMMA_X The gamma X is a user-friendly magnetic Diaphragm dosing pump which for a trouble-free Dosing process ensures. The integrated pressure measurement with display In addition to providing greater safety through compensation of pressure fluctuations in the process for optimal chemical consumption. Total output range of the series: 2.3 l/h — 45 l/h, 25 — 2 bar (flow rate/pressure see offered pump type/identification code) - Easy adjustment of the dosing rate directly in l/h or in gph - Trouble-free process flow through detection of hydraulic Defective conditions such as gas in the dosing head, “overpressure” and “no Pressure "(no or too high backpressure) - Thanks to the regulated magnetic drive for continuous Small dosage of approx. 1 ml/h is suitable — this also means Avoiding vibration damage caused by low pulsation Dosing characteristics • This saves pulsation dampers or mixers (in the low or medium performance range of the pump). - highest dosing accuracy due to compensation of Pressure fluctuations - Integrated 1 week/1 month timer - In concentration mode, direct input of the desired Final concentration for dosing tasks that are proportional to the quantity - Can be used for almost all liquid chemicals thanks to available material variants PVDF, acrylic glass, PP, PTFE and inox Technical details: ********************** • External control via potential-free contacts with pulse Translation/Reduction • Batch operation with max. 99,999 strokes/start pulse • Options include optical membrane rupture detector, external Control via mA signal, relay modules (e.g. 4-20 mA output), self-venting dosing head versions as well as Bluetooth function • Selectable connections to process control systems via BUS Interface such as PROFIBUS®, PROFINET®, Modbus or CAN bus Pump type: 0708 - 07bar; 08l/h connection 8x5/SS8x7 Dosing head material: TT - PTFE + 25% carbon Seal material: T - standard membrane /PTFE seal Dosing head version: 0 - o.vent; o.valve spring Hydraulic connection: 0 - standard connection Membrane rupture detector: 0 - without Version: 0 - housing RAL5003/hood RAL2003 Logo: 0 - with PM logo Power stage design: U - Universal 100-240V Cable and plug: A - 2m Europe Relay function: 1 - 3-pin 230V relay Accessories: 0 - without accessories Control option: 3 - manual+cont.m.pulseCont. +Anal Dosage monitoring: 0 - dynamic dosing monitoring Remote stop (pause): B - with Bluetooth Language: DE - deutsch Approval: 01 - CE Documentation language: DE - German Frequency (Hz): 50/60Hz Voltage (V): 100-230V Power (W): 25W Protection class: IP66/NEMA4X Flow rate (l/h): 7.6l/h Back pressure (bar): 07bar |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for ProMinent - GMXA0708TTT00000UA1030BDE magnetic dosing pump number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Sweden (Sverige) Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
Order number: 1010797
Pump type: 0420 4 bar, 20 l / h St.Anschl.12x9 Dosing head: TT PTFE + 25% carbon Seal material: T standard Membr./ PTFE sealing. Dosing head: 0 o.Entlüftung, o.Ventilfeder Hydraulic Conn: 0 standard connection Version: 0 With PM-Logo Execution performance: U universal controller 100 - 240 V Cables and connectors: A 2m Europe Relay function: 1 alarm sloping Accessories: 0 without accessories Control variant: 0 Manual + Cont. 1: 1 Security Options: 0 no access control Dosing monitoring: 0 dosing monitor dynamically Remote Stop: 0 Pause break contact, level Opener Admission: 01 CE Frequency: 50 / 60Hz Voltage: 100-230V Power: 23W Protection: IP65 Capacity: 17,1l / h Back pressure: 04bar
solenoid GAL_ Series: GALA gamma / L pump version A Pump type: 1000 10 bar, 0.7 l / h St.Anschl. 6x4 Dosing head: PV PVDF Seal material: T standard Membr./ PTFE sealing. Dosing head: 2 m.Entlüftung, o.Ventilfeder Hydraulic Conn: 0 standard connection Version: 0 With PM-Logo Execution performance: U universal controller 100 - 240 V Cables and connectors: A 2m Europe Relay function: 0 without relay Accessories: 4 multifunction valve + Accessories Control variant: 5 Timer + Cont. + P.C. + A.S. Security Options: 0 no access control Dosing monitoring: 0 dosing monitor dynamically Remote Stop: 0 Pause break contact, level Opener Admission: 01 CE Frequency: 50 / 60Hz Voltage: 100-230V Power: 17W Protection: IP65 Flow rate: 0,74l / h Back pressure: 10bar
solenoid GAL_ Series: GALA gamma / L pump version A Pump type 1005 10 bar, 5 l / h St.Anschl. 8x5 Dosing head: PP polypropylene Sealing material: E Standard Membr./ EPDM sealing. Dosing head: 2 m.Entlüftung, o.Ventilfeder Hydraulic Conn: 0 standard connection Version: 0 With PM-Logo Execution performance: U universal controller 100 - 240 V Cables and connectors: A 2m Europe Relay function: 0 without relay Accessories: 0 without accessories Control variant: 0 Manual + Cont. 1: 1 Security Options: 0 no access control Dosing monitoring: 0 dosing monitor dynamically Remote Stop: 0 Pause break contact, level Opener Admission: 01 CE Frequency: 50 / 60Hz Voltage: 100-230V Power: 17W Protection: IP65 Flow rate: 4.4 l / h Back pressure: 10bar
Magnetdosierpumpe GALa
Solenoid pump type 1005 10 bar, 5 l / h St.Anschl. 8x5 Dosing head: PV PVDF Seal material: T standard Membr./ PTFE sealing. Dosing head: 2 m.Entlüftung, o.Ventilfeder Hydraulic Conn: 0 standard connection Version: 0 With PM-Logo Execution performance: U universal controller 100 - 240 V Cables and connectors: A 2m Europe Relay function: 1 alarm sloping
DOSING PUMP HEAD, TYPE: DOS.H.ASS - 122.0x67.0, INTAKE AND DELIVERY with valves
Mehrsch.Membr. S3_a d178x132 PTFE / EPDM Order number: 1029603
Multi-function valve MFV-DK
Sensor for measuring ozone in clear water
sensor OZE 3-mA-2ppm
pH sensor
gel-filled pH electrode with glass stem and PTFE ring diaphragm Typical applications: municipal and industrial waste water, drinking water, and Water, chemicals, paper making, food industry. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / Pressure: 0..80 degree C / 6 bar at least conductivity. 50 micro S / cm Installation length: 120 +/- 3mm
pH electrode
Solid electrolyte-filled pH combination electrode with glass shaft Annular gap. Typical application: waste water, drinking water, and industrial water, process chemistry, Emulsions, suspensions. pH range: 1..12 Terminal / thread: SN6 / PG 13.5 Temperature / pressure: 0..100 degrees C / max. 6..16 bar at least conductivity. 500 micro S / cm Installation length: 120 +/- 3mm Order number: 305096
PH Sensor
Sensor
pH electrode