| BRAND | Gorman Rupp |
| Product | GRI-INTG3- 562 |
| Internal code | IMP5017224 |
| Custom code | 841370210010 |
| Technical specification | GRI-INTG3-562 Integrated Brushless DC Magnetic Drive Pumps INTG3 Series Specifications Voltage: 24V DC Lead Wires: 3-wire Power: max. 60W Current: max. 2.07A @ max. Flow Flow (H2O): max. 25.46l/min (6.73gpm) Head: max. 1.19bar / 12,13mWS (17.27psi / 39.83ft) Flow and pressure dependent on input voltage. Conn. Inlet / Outlet: 1/2" MHB Max. Fluid Temp: 95°C (203°F) Max Sys. Pressure: 5.17bar (75psi) Weight: 0.45kg (12.8oz / 362.9gr) Materials in contact with solution Body: PPS (Ryton®) Impeller: PPS (Ryton®) Pump Shaft: Ceramic Bearing Plate: PPS (Ryton®) Housing: PPS (Ryton®) Rotor Shell: PPS (Ryton®) Static O-Ring: EPDM Motor specifications Motor: Integrated, Brushless DC Supply Voltage: 9-24 VDC 60 Watts Inrush Current: None. Ramps up to running current. It is recommended that the customer provide circuit over current protection to the pump. 60 watt pump: 5 amp fast acting fuse is recommended. Electronics Max Power: 60 watts Remote Speed Control (Optional - Consult Factory) • Third Wire • 0-5 volts (Reference DC NEG). Speed is controlled by a nominal 0-5 volt DC signal. 3-Wire: Three wires are required when the pump speed is controlled by a nominal 0-5v DC signal. This is done through a control panel such as a computer or other control devices that is connected to the pump via the third wire. The 0-5v signal controls the speed of the pump, not the voltage supplied to the pump. O-Ring Material: EPDM = Ethylene Propylene Diene Monomer, FKM = Fluoroelastomer. Testing performed in a controlled laboratory environment. Actual performance may vary (+) or (-) 10% from the information shown. Do Not Run Pumps Dry. Pumps must be in a continuous flooded suction environment |
Please send us your request per e-mail, so we can send you our offer with competitive prices and delivery time for Gorman Rupp - GRI-INTG3- 562 number or any other model you need. We can offer competitive price, and delivery time with wide products distribution network in Sweden (Sverige) Industrial products Market.
WE SELL ONLY NEW AND ORIGINAL PRODUCTS!
pump
High Speed Centrifugal Pump and Motor unit
GASKET
MECH SEALASSY
DISC FLANGE GASKET
Self Priming Centrifugal Pump
pump seal
pump seal
pump seal
pump caster
pump seal
O-ring BUNA
Pump
impeller
PUMP CASING
COVER PLATE ASSY
PRESS RELIF VALVE
BEARING HOUSING
SEAL PLATE GASKET