Buy PECA15PB-R-3-TROP from ARDETEM in Sweden (Sverige)

Three-phase universal analyzer Disturbancen Three-phase universal analyzer interference 3 or 4 wire three-phase systems, reading out balanced and unbalanced networks 2 R-2 relay outputs NO F - Modbus TCP Ethernet output Display: 96 x 96 backlit Display up to 50 parameters Upper and lower wave analysis 2 programmable voltage ranges Un = 100V LN / 173V LL and 330V LN / 600V LL 2 programmable current areas A 0..1 and 0..5 A Universal power supply AC / DC Reaction time 40 ms (2 cycles) Standard output RS 485 Modbus Customs tariff number: 9030390090 Country of origin: France / EU

TPIs 50 N F / I converter Ethernet single-channel frequency converter Input: contact, logic, Namur, NPN / PNP Analog output: 0 - 20 mA, 0 - 10 V PC programmable with software SUPERVISION via USB port or Ethernet

TPIs 12 transmitters with process input 1 analog output Transmitters with process input in 7.2 mm-housing Input: mA; mV; V 1 Analog output: 0 - 10 V; 0/4 - 20 mA active Power: 24 VDC PC programmable with software SUPERVISION via USB port

Universal phase analyzer Disturbancen AC universal analyzer for interference 3 or 4 wire three-phase systems, reading balanced and unbalanced networks 2 R-2 relay outputs NO F - Modbus TCP Ethernet output Display: 96 x 96 with backlight Display up to 50 parameters Upper and lower wave analysis 2 programmable voltage ranges Un = 100V LN / LN 173V LL and 330V / 600V LL 2 programmable current ranges 0 to 1 A and 0 .5 A Universal Power Supply AC / DC 40ms response time (2 periods) Standard output RS 485 Modbus Customs tariff number: 9030390090 Country of origin: France / EU

TRM4 2A Universal three-phase analyzerUniversal three-phase analyzer3 or 4 wire three-phase systems, readingbalanced and unbalanced networksInput: Voltage 0 3 .150 VAC, 0 ... 500 VACOutput: 3 Current 0 .1 0 .5 A and A (automaticswitching)Universal power supply AC / DCResponse time 40ms (two periods)Outputs 2 x analog bipolar)PC programmable with software SUPERVISIONPossible options:Up to 5 programmable analog0 ... 20mA, 4 ... 20mA, 0 ... 5 mA two of thesebipolar)4 output relays without analog output, or 2Relay outputs with max. 2 analog outputsEthernetProfibus DP• Overload: 10 times the rated current for 10 seconds• 50 times rated current (EDF standard) for 60 ms

Display with bi-directional Process input, analog output + 2 relays Digital display 48 x 96mm, 4 digits bidirectional process input (mA, mV, V) mA output active and 2 relays Universal power supply 24 - 240VAC / DC via front panel or by means of PC and software SUPERVISION

Display with bidirectional process input

Display 48 x 96mm with Universal Input + 2 relays in the output Digital display 48 x 96mm, 4 digits Universal input mA, V, temp. Potentiometer resistance 2 relays in the output Universal power supply 24 - 240VAC / DC via front panel or by means of PC and software SUPERVISION

Display with 48 x 96mm Universal input + 2 output relays in Digital display 48 x 96mm, 4 digits Universal input mA, V, temp potentiometers, resistance 2 relay output in Universal power supply 24 - 240VAC/DC Programmable via front keys or with PC and software SUPERVISION

Supervision programming tool Software to program the ARDETEM Devices including USB interface and connection cables

μCONSOLE LCD Display / Removable programming unit for all Ardetem devices

TPI 10 AR universal transmitter with Analog output and 2 relays TPI 10 AR Universal Input: current, voltage, temperature resistance Output: Analog (current / voltage), 2 relays Programmable with display / PC Universal power supply: 20-300 VDC / VAC

digital indicator universal power supply

electrical network analyzer

ELECTRICAL MEASURE CENTRAL Current input: 1A and 5 A AC Voltage input: 175 V and 600 V AC For all network types Graphical LCD with rear-lighting 28 measurable parameters: 3U, 3V, 3I, cos, f, F, P, Q, S, E... Display of the energies on 8 digits on a single line with automatic switching to the upper unit Automatic correction of the wiring Output: RS 485 Modbus/Jbus Universal power supply; 20 to 270 vac and 20 to 300 vdc Format: 96x96mm

Measurement of DC signals - Dimensions 96x96x108mm -LCD ,DC networks

Signal analyzer for electrical networks

INSULATION FAULT DETECTOR

programmable transmitter

AC MEASURE TRANSMITTERS - high insulation 4KV. Input 0-5A and standard output 4-20mA Galvanic partition: 4Kv Accuracy rating: <0.3% Power supply: 20 to 270 Vac and 20 to 300 Vdc

DC MEASURE TRANSDUCER / DC CONVERTER Input / input: 0-1000 VDC Output / output: 4-20 mA Galvanic partition / galvanic isolation: 2KV Accuracy rating / accuracy: 0.2% For DIN rail mounting / for DIN rail mounting Power supply / power supply: 20 ... 270 Vac and 20 ... 300 Vdc

TMP-HI-2 EXCITATION CURRENT TRANSDUCER ,I/P : 75A/100mV O/P : 4-20 mA AUX : 90-270 VAC, 88-350 VDC 2-WIRE SENSOR

Universal current and voltage transmitter

PROGRAMMABLE TRANSMITTER

power converter

PROGRAMMABLE CONVERTER Input: mA,mV,V. Bidirectionnal current and voltage input up to +/- 300 V dc Accuracy rating: 0.1% Programmable scale factor Supply for 2-wire sensor Insulated analog output (voltage or current) For DIN rail mounting Programmable by software or µconsole (optional) Universal power supply: 20 to 270 vac and 20 to 300 vdc

A three-phase analyzer for synchronous networks Three-phase analyzer for synchronous networks DIN-rail mounting AC indicator for exchange or Three-phase systems Voltage input 0 1 .150 VAC, 0 ... 600 VAC + 20% 1 Current input 0 .1 0 .5 A or A (automatic switching) Spanungsversorgung Universal AC / DC Response time 40ms (two periods) 1 analogue output Programmable with Display (LCD μCONSOLE) or PC

Supply : 90 ÷ 270VAC; 8÷350VDC , Range : 150/500V & 1A÷5A